Folding during sheeting improved qualities of dried noodles through gluten network proteins.

The texture properties after cooking for 12 min were selected to optimize the sheeting parameters, and the results were verified using the comprehensive quality of dried noodles. The distribution of water, characteristics of gluten protein, and interaction between gluten network and starch were analyzed to clarify the mechanism of the quality of dried noodles. Results showed that the optimal folding angle was 45°, under this condition, the largest anti-extension displacement perpendicular to the rolling direction and the smallest cooking loss were obtained. The hardness and smoothness of cooked noodles increased by about 14% to 17%. Further, the transverse relaxation time of strongly bound water significantly decreased, while the relative content and binding strength increased. The hydrogen bonds and α-helix contents increased by about 68.8% and 53.1%, respectively. Folding and sheeting enhanced the combination of starch granules and gluten network causing, decreased in the average length and porosity of the gluten network. It is depicted from the results that the method of optimizing the sheeting process based on the texture of dried noodles cooked for 12 min was feasible. And the 45° folding and sheeting could help to improve the quality of dried noodles.

Effects of germination time on the structure, functionality, flavour attributes, and in vitro digestibility of green Altamura lentils (Lens culinaris Medik.) flour.

There has been an increase in the use of adoptable bioprocessing methods for the development of high-quality leguminous ingredients. The potential use of germinated green Altamura lentils as a food ingredient is closely related to the resulting properties. The objective of this study was to evaluate the impact of three germination times - 0 (C), 24 (G) and 48 (H) hours - on the physicochemical, microstructural, flavour, functional, and nutritional features of lentil flour samples (CF, GF and HF). Lentil flour samples were obtained by grinding both whole green seeds (C) and germinated seeds (G and H), and then sifting them to obtain a particle size < 300 µm. The germinated samples - GF (24 h) and HF (48 h) - exhibited differences (P < 0.05) in the physicochemical and bioactive properties of CF (control). Similarly, compared with those in the control sample, the total starch, amylose and total phenolic contents in the GF and HF samples decreased, while the protein content increased (p < 0.05). A decrease in the presence of intact starch granules was observed via SEM in the germinated samples. The germination time had a significant (P < 0.05) effect on the colour indices, L*, a*, and b* of the samples. Flavour attributes were significantly influenced by the germination time. Overall, a total of 14 (CF) and 17 (GF and HF) aromatic compounds were identified. The technological characteristics of the CF, GF and HF dough samples were studied using a Brabender farinograph. Germination time affects the flour properties, leading to a significant decrease in farinographic parameters such as water absorption (WA), dough development time (DT), and dough stability (DS) and an increase in the degree of dough weakening (DOS). Differential scanning calorimetry was employed to examine the gelatinization transition of the samples. Germination strongly influenced all the thermal properties of the samples. It also had a significant impact on the in vitro starch digestibility, starch fraction and glycaemic index (eGI) of the samples. In particular, the eGI of germinated lentils was lower than that of the CF. In conclusion, the germination time could be a key factor modulating some crucial lentil flour properties.

Important roles of coarse particles in pasting and gelling performance of different pulse flours under high-temperature heating.

Dehulled pea, lentil, and faba bean grains were milled into flours with 0.5- to 2.5-mm sieves. As the particle size decreased, damaged-starch contents of the flours from the same pulse crop increased. At a holding temperature of 95 °C in RVA, peak and final viscosities and gelling ability of the flours generally increased as the particle size decreased. When the holding temperature increased from 95 to 140 °C, pasting viscosities of pea and lentil flours and gel hardness of lentil flours gradually decreased. In contrast, pasting viscosities and gel hardness of faba bean flours reached the highest values at 120 °C. The comparison of the pulse flours varying in particle size across the three market classes revealed that coarse particles comprising agglomerated starch, protein, and dietary fiber (i.e., particles of the second peak in the bimodal particle-size distribution curves) showed significant correlations with certain important functional properties of pulse flours.

Large flour aggregates containing ordered B + V starch crystals significantly improved the digestion resistance of starch in pretreated multigrain flour.

The starch digestibility of flour is influenced by both physicochemical treatment and flour particle size, but the interactive effect of these two factors is still unclear. In this study, the effect of pullulanase debranching, combined with heat-moisture treatment (P-HMT), on starch digestibility of multi-grain flours (including oat, buckwheat and wheat) differing in particle size was investigated. The results showed that the larger-size flour always resulted in a higher resistant starch (RS) content either in natural or treated multi-grain flour (NMF or PHF). P-HMT doubled the RS content in NMFs and the large-size PHF yielded the highest RS content (78.43 %). In NMFs, the cell wall integrity and flour particle size were positively related to starch anti-digestibility. P-HMT caused the destruction of cell walls and starch granules, as well as the formation of rigid flour aggregates with B + V starch crystallite. The largest flour aggregates with the most ordered B + V starch were found in large-size PHF, which contributed to its highest RS yield, while the medium- and small-size PHFs with smaller aggregates were sensitive to P-HMT, resulting in the lower ordered starch but stronger interactions between starch and free lipid or monomeric proteins, eventually leading to their lower RS but higher SDS yield.

Thermomechanical transitions of meat-analog based fried foods batter coating.

This study aimed to characterize the thermomechanical transitions of meat-analog (MA) based coated fried foods. Wheat and rice flour-based batters were used to coat the MA and fried at 180 °C in canola oil for 2, 4 and 6 min. Glass-transition-temperature (Tg) of the coatings were assessed by differential scanning calorimetry, directly after frying or after post-fry holding. Mechanical texture analyzer and X-ray microtomography were employed to assess textural attributes and internal microstructure, respectively. Batter-formulation substantially impacted the Tg of fried foods coating i.e., crust. Tg of fried foods crust were ranged between -20 °C to -24 °C. Tg was positively correlated with frying time and internal microporosity (%), whereas negatively correlated with moisture content. Internal microstructure greatly influenced the textural attributes (hardness, brittleness, crispiness). Post-fry textural stability considerably impacted by Tg. Negative Tg value explains post-fry textural changes (hard-to-soft, brittle-to-ductile, crispy-to-soggy) of MA-based coated products at room-temperature (25 °C) and under IR-heating (65 °C).

Effects of different thawing methods on physical and physicochemical properties of frozen dough and quality of corresponding steamed bread.

The thawing method is critical for the final quality of products based on the frozen dough. The effects of ultrasound thawing, proofer thawing, refrigerator thawing, water bath thawing, ambient thawing, and microwave thawing on the rheology, texture, water distribution, fermentation characteristics, and microstructure of frozen dough and the properties of steamed bread were investigated. The results indicated that the ultrasound thawing dough had better physicochemical properties than other doughs. It was found that ultrasound thawing restrained the water migration of dough, improved its rheological properties and fermentation capacity. The total gas volume value of the ultrasound thawing dough was reduced by 21.35% compared with that of unfrozen dough. The ultrasound thawing dough displayed a thoroughly uniform starch-gluten network, and an enhanced the specific volume and internal structure of the steamed bread. In conclusion, ultrasound thawing effectively mitigated the degradation of the frozen dough and enhanced the quality of steamed bread.

Effects of freeze-thaw cycles on the quality of Hot-dry noodles: From the moisture, starch, and protein characteristics.

Freeze-thaw cycles (FTC) could cause damage to food during storage. The effects of different FTC on Hot-dry noodles (HDN) in terms of quality, moisture, starch, and protein characteristics were studied. This study showed that FTC decreased the texture properties and water absorption of HDN. Meanwhile, cooking loss was significantly increased after FTC. The water content of HDN was decreased and water migration was increased during FTC. In addition, results showed that FTC destroyed the order structure and increased the crystallinity of starch in HDN. Under FTC, the disulfide bond of HDN was broken, the free sulfhydryl group was increased, and the electrophoretic patterns confirmed the protein depolymerization. The microstructure also showed that the gluten network became incomplete and starch was exposed outside the substrate. This study expounded the mechanism of HDN quality deterioration during FTC, which laid a foundation for the development and improvement of frozen and freeze-thaw noodles.

Rhubarb powder: Potential uses as a functional bread ingredient.

As a traditional staple food, bread lacks several nutrients such as fiber and minerals. In this study, the possibilities of using rhubarb powder to enrich wheat bread were investigated. Rhubarb powder was replaced with wheat flour at the ratios of 0%, 4%, 8%, and 12%. In order to reveal effects of rhubarb powder on quality properties of bread, color, moisture, total protein, fat content, antioxidant activity, textural, and sensory analysis were conducted. As the rhubarb powder ratio increased, the fiber (10.60 ± 0.55), ash (4.34 ± 0.13), and fat content (2.17 ± 0.55) of bread samples increased significantly (p < 0.05). Antioxidant activity (19.61% ± 0.53%) and total phenolic contents (916.38 ± 2.69) of bread samples also increased significantly (p < 0.05). The colors of the enriched breads were relatively dark. The breads containing 12% rhubarb powder had the highest ash content (4.34 ± 0.13). The samples containing 4% rhubarb powder took the highest sensory scores from the sensory panel in terms of odor, flavor, and overall impression. However, as the ratio of rhubarb powder increased, the sensory values of bread samples decreased. According to the results of this study, rhubarb powder could be used up to 4% to produce acceptable breads in terms of sensory properties with improved nutritional quality.

Mild steam treatment: Enhancing the rehydration performance of instant rice noodles by changing the physicochemical properties and gel structure of rice starch.

The "instant" quality of instant rice noodles is significantly affected by slow rehydration during cooking. This happens as a result of the native rice starch's low ability to gelatinize as well as the high shear and pressure utilized in industries during the widely used extrusion molding process. In order to address this issue, the rice flour was pretreated with mild steam (MS) technology. The results revealed that the rehydration qualities of the rice noodles that were extruded from the steam-treated flour significantly improved. There was a reduction of 25.5% in the rehydration time, from 443 to 330 s. The MS-treated rice starch's peak viscosity increased to 4503 from 4044 mPa/s. Decreases in gelatinization enthalpy (ΔH) and short-range ordering also suggest a reduction in difficulty in accomplishing starch gelatinization. Scanning electron microscopy studies showed particle aggregation increased as the treatment duration lasted longer. In conclusion, our findings indicate that we successfully addressed the issue of slow rehydration in instant rice noodles while presenting a novel approach for their manufacturing in the manufacturing sector.

Improvement of sorghum-wheat blended flours by E-beam irradiation: Physicochemical properties, rheological behavior, microstructure, and quality properties.

To enhance the processing suitability of blended flours, this study used 4 kGy E-beam irradiated (EBI) sorghum flour in different ratios blended with wheat flour and further verified the improvement mechanism of the processed products under the optimal ratios. The results suggested that the EBI can mitigate the deterioration of the blend flour farinograph properties while enhancing the gas release during dough fermentation. Under the same addition ratio, the irradiated blend flours showed higher expansion height, gas release, cavitation time, and gas retention coefficient than the control flours. Also, irradiated blend flours retained a gluten network at a higher addition rate (20 %). Moreover, the irradiated blend flours were optimized at 10 % as its pasting and thermal properties were improved. Notably, this ameliorating effect promotes a decrease in hardness and chewiness and an increase in cohesion of the bread cores, presenting better textural attributes and delaying the aging rate during storage. The findings are instructive for applying EBI technology in the manufacture and quality improvement of mixed grain breads and open a new research avenue for processing sorghum staple foods.

Precision in wheat flour classification: Harnessing the power of deep learning and two-dimensional correlation spectrum (2DCOS).

Wheat flour is a ubiquitous food ingredient, yet discerning its various types can prove challenging. A practical approach for identifying wheat flour types involves analyzing one-dimensional near-infrared spectroscopy (NIRS) data. This paper introduces an innovative method for wheat flour recognition, combining deep learning (DL) with Two-dimensional correlation spectrum (2DCOS). In this investigation, 316 samples from four distinct types of wheat flour were collected using a near-infrared (NIR) spectrometer, and the raw spectra of each sample underwent preprocessing employing diverse methods. The discrete generalized 2DCOS algorithm was applied to generate 3792 2DCOS images from the preprocessed spectral data. We trained a deep learning model tailored for flour 2DCOS images - EfficientNet. Ultimately, this DL model achieved 100% accuracy in identifying wheat flour within the test set. The findings demonstrate the viability of directly transforming spectra into two-dimensional images for species recognition using 2DCOS and DL. Compared to the traditional stoichiometric method Partial Least Squares Discriminant Analysis (PLS_DA), machine learning methods Support Vector Machines (SVM) and K-Nearest Neighbors (KNN), and deep learning methods one-dimensional convolutional neural network (1DCNN) and residual neural network (ResNet), the model proposed in this paper is better suited for wheat flour identification, boasting the highest accuracy. This study offers a fresh perspective on wheat flour type identification and successfully integrates the latest advancements in deep learning with 2DCOS for spectral type identification. Furthermore, this approach can be extended to the spectral identification of other products, presenting a novel avenue for future research in the field.

Use of Bacillus spp. as beneficial fermentation microbes in baking.

The development of minimally processed baked goods is dependent on new "clean label" functional ingredients that allow substitution of additives without compromising quality. We investigated the use of fermentation with Bacillus spp. as a novel approach to improve bread quality. Bacillus velezensis FUA2155 and Bacillus amyloliquefaciens Fad WE ferments were prepared using white wheat flour, wheat bran or buckwheat, and were added at a level of 2.5-20 % to bread dough. Ropy spoilage of bread was controlled by sourdough addition at a level of 10 or 20 %. The volume of white wheat bread and wheat bran bread increased by 47.4 and 62.5 % respectively with 2.5 % Bacillus ferments. Bread shelf-life was prolonged by the Bacillus ferment only at higher dosages that also reduced bread volume. The use of unfermented or sourdough fermented buckwheat improved bread volume and delayed mould spoilage. The characterization of water-soluble polysaccharides from sourdoughs and Bacillus ferments revealed that solubilization of arabinoxylans contributed to the increase in volume after fermentation of wheat but not after fermentation of buckwheat. In conclusion, Bacillus fermentation can be used to improve bread quality, adding to the diversity of microbes that are suitable for baking applications.

Technofunctional Properties and Rheological Behavior of Quinoa, Kiwicha, Wheat Flours and Their Mixtures.

Wheat flour is a common raw material in the food industry; however, Andean grains, such as quinoa and kiwicha, are gaining popularity due to their quality proteins, fiber, and bioactive compounds. A trend has been observed toward the enrichment of products with these Andean flours, with them even being used to develop gluten-free foods. However, evaluating interactions between raw materials during industrial processes can be complicated due to the diversity of inputs. This study focused on evaluating the technofunctional and rheological properties of wheat, quinoa and kiwicha flours using a simple lattice mixture design. Seven treatments were obtained, including pure flours and ternary mixtures. Analyses of particle size distribution, water absorption index, subjective water absorption capacity, soluble material index, swelling power, apparent density and physicochemical properties were performed. Additionally, color analysis, photomicrographs and Raman spectroscopy were carried out. The results indicate significant differences in properties such as particle size, water absorption and rheological properties between the flours and their mixtures. Variations in color and microstructure were observed, while Raman spectroscopy provided information on molecular composition. These findings contribute to the understanding of the behavior of Andean flours in baking and pastry making, facilitating their application in innovative food products.

[Study of composite mixtures based on durum wheat semolina and white beans flour for pasta production as specialized food products].

Increasing the number of chronic non-communicable diseases around the world is a critical social problem in many countries. In this regard, the creation of specialized foods that correct dysfunctions of the human body is a priority direction in science and food industry. Legumes are characterized by a high content of protein, minerals and trace elements, which determines their possible use as the main raw materials for creating specialized foods. The aim of this research was to present a medical, biological and technological justification for the possibility of producing pasta based on composite mixtures of durum wheat semolina and white bean flour as specialized foods with increased protein content and optimal mineral ratio. Material and methods. The objects of the study were grains of durum wheat (grade Krasnokutka-13), whole meal flour from white beans, composite mixtures in various percentages, and pasta from them. The nutritional and biological value of durum wheat semolina and bean flour was determined experimentally, the nutrient profile of the developed composite mixtures - by calculation. The rheological properties of dough from composite mixtures and the cooking properties of pasta made from them were assessed. Results. It has been established that increase in the proportion of white bean flour in composite mixes elevated calcium and protein content, optimized an amino acid profile, the ratio of calcium to phosphorus, significantly reduced the glycemic load. Bean flour introduction into composite mixtures positively affected the rheological properties of the dough and products from it, in particular, on the speed and energy intensity of dough kneading and aging processes of starched polysaccharides, however, lead to a decrease in dry pasta strength. The pasta made from composite mixtures meets the technological requirements for pasta in terms of a number of basic indicators, namely: the volume of dry pasta, the volume of pasta after cooking and the boilability coefficient. Conclusion. The rheological and technological properties of composite mixtures and their nutrient profile make it possible to recommend them for the production of pasta, as specialized foods.

Nutritional profiling, fiber content and in vitro bioactivities of wheat-based biscuits formulated with novel ingredients.

This study evaluated the nutritional profile and fiber content of innovative formulations of wheat-based biscuits enriched with chia seeds, carob flour and coconut sugar. The in vitro antioxidant, cytotoxic, anti-inflammatory and antimicrobial activities were also investigated to understand the potential health advantages of the incorporation of these new ingredients. The novel biscuits demonstrated significant improvements in protein and mineral content, with increases of 50% and 100% in chia biscuits, and up to 20% and 40% in carob biscuits, respectively. Fiber also notably increased, particularly in samples containing 10% carob flour, which increased four times as compared to wheat-based samples. The new ingredients exhibited antibacterial and antifungal activity, particularly against Yersinia enterocolitica (minimum inhibitory concentration 1.25 mg mL-1 in coconut sugar) and Aspergillus fumigatus (minimum inhibitory concentration/minimum fungicidal concentrations 2.5/5 mg mL-1 in chia seeds). However, the final biscuits only displayed antifungal properties. Carob flour and chia seeds had a remarkably high capacity to inhibit the formation of TBARS and promoted greater antioxidant activity in biscuit formulations, with EC50 values decreasing from 23.25 mg mL-1 (control) to 4.54 mg mL-1 (15% defatted ground chia seeds) and 1.19 mg mL-1 (10% carob flour). Only chia seeds exhibited cellular antioxidant, anti-inflammatory and cytotoxic activity, attributes that were lost when seeds were added into the biscuits. These findings highlight the potential health benefits of these ingredients, particularly when incorporated in new wheat-based formulations.

Bioprospecting of sourdough microbial species from artisan bakeries in the city of Valencia.

This work describes the characterization of an artisanal sourdough set of bakeries located in the city of Valencia. Culture-dependent and -independent analyses detected Fructilactobacillus sanfranciscensis, Saccharomyces cerevisiae and Kazachstania humilis as dominant species. Nevertheless, specific technological parameters, including backslopping temperature, dough yield, or the addition of salt affected microbial counting, LAB/Yeast ratio, and gassing performance, favouring the appearance of several species of Lactobacillus sp., Limosilactobacillus pontis or Torulaspora delbrueckii as additional players. Sourdough leavening activity was affected positively by yeast counts and negatively by the presence of salt. In addition, the predominance of a particular yeast species appeared to impact the dynamics of CO2 release. Seven important flavour-active compounds (ethyl acetate, 1-hexanol, 2-penthylfuran, 3-ethyl-2-methyl-1,3-hexadiene, 2-octen-1-ol, nonanal and 1-nonanol) were detected in all samples and together with 3-methyl butanol and hexyl acetate represented more than the 53% of volatile abundancy in nine of the ten sourdoughs analysed. Even so, the specific microbial composition of each sample influenced the volatile profile. For example, the occurrence of K. humilis or S. cerevisiae as dominant yeast influenced the composition of major alcohol species, while F. sanfranciscensis and L. pontis positively correlated with aldehydes and octanoic acid content. In addition, relevant correlations could be also found among different technological parameters and between these, volatile compounds and microbial species. Overall, our study emphasises on how differences in technological parameters generate biodiversity in a relatively small set of artisan sourdoughs providing opportunities for excellence and quality baking products.

Exploring the characteristics of Burkholderia gladioli pathovar cocovenenans: Growth, bongkrekic acid production, and potential risks of food contamination in wet rice noodles and vermicelli.

This research investigated the presence of Burkholderia gladioli pathovar cocovenenans (BGC) in wet rice and starch products, Tremella, and Auricularia auricula in Guangzhou, China. It examined BGC growth and bongkrekic acid (BA) production in wet rice noodles and vermicelli with varying rice flour, edible starch ratios, and oil concentrations. A qualitative analysis of 482 samples revealed a detection rate of 0.62%, with three positive for BGC. Rice flour-based wet rice noodles had BA concentrations of 13.67 ± 0.64 mg/kg, 2.92 times higher than 100% corn starch samples (4.68 ± 0.54 mg/kg). Wet rice noodles with 4% soybean oil had a BA concentration of 31.72 ± 9.41 mg/kg, 5.74 times higher than those without soybean oil (5.53 ± 1.23 mg/kg). The BA concentration correlated positively (r = 0.707, P < 0.05) with BGC contamination levels. Low temperatures (4 °C and -18 °C) inhibited BGC growth and BA production, while higher storage temperatures (26 °C and 32 °C) promoted BGC proliferation and increased BA production. Reducing edible oil use and increasing edible starch can mitigate the risk of BGC-related food poisoning in wet rice noodles and vermicelli production. Further research is needed to find alternative oils that do not enhance BA production. Strengthening prevention and control measures is crucial across the entire production chain to address BGC contamination and BA production.

Can a Fraction of Flour and Sugar Be Replaced with Fruit By-Product Extracts in a Gluten-Free and Vegan Cookie Recipe?

Certain food by-products, including not-good-for-sale apples and pomegranate peels, are rich in bioactive molecules that can be collected and reused in food formulations. Their extracts, rich in pectin and antioxidant compounds, were obtained using hydrodynamic cavitation (HC), a green, efficient, and scalable extraction technique. The extracts were chemically and physically characterized and used in gluten-free and vegan cookie formulations to replace part of the flour and sugar to study whether they can mimic the role of these ingredients. The amount of flour + sugar removed and replaced with extracts was 5% and 10% of the total. Physical (dimensions, color, hardness, moisture content, water activity), chemical (total phenolic content, DPPH radical-scavenging activity), and sensory characteristics of cookie samples were studied. Cookies supplemented with the apple extract were endowed with similar or better characteristics compared to control cookies: high spread ratio, similar color, and similar sensory characteristics. In contrast, the pomegranate peel extract enriched the cookies in antioxidant molecules but significantly changed their physical and sensory characteristics: high hardness value, different color, and a bitter and astringent taste. HC emerged as a feasible technique to enable the biofortification of consumer products at a real scale with extracts from agri-food by-products.

Dietary methanotroph bacteria meal alleviates soybean meal-induced enteritis by improving immune tolerance and intestinal flora profile of juvenile turbot (Scophthalmus maximus L.).

An 8-week growth trial was performed to investigate the protective effects of methanotroph bacteria meal (MBM) produced from methane against soybean meal-induced enteritis (SBMIE) in juvenile turbot (Scophthalmus maximus L.). Five isonitrogenous and isolipidic diets were formulated: fishmeal-based diet (FM, the control group); FM with approximate 50% of fishmeal substituted by 399.4 g/kg soybean meal (SBM); SBM supplemented with 63.6, 127.2 and 190.8 g/kg MBM (named MBM1, MBM2 and MBM3), each diet was randomly assigned to triplicate fibreglass tanks. Results showed that fish fed with SBM exhibited enteritis, identified by reduced relative weight of intestine (RWI), as well as expanded lamina propria width and up-regulated gene expression of pro-inflammatory cytokines (tnf-α, il-6 and il-8) in intestine. While the above symptoms were reversed when diet SBM supplemented with MBM at the levels of 63.6 and 127.2 g/kg, as well as characterized by up-regulated gene expression of anti-inflammatory cytokines (tgf-ß and il-10) and tight junction protein (claudin3, claudin4 and claudin7) in intestine. Intestinal transcriptome analysis showed that the differentially expressed genes between groups FM and SBM predominantly enriched in the JAK-STAT signaling pathway, and the enrichment of differentially expressed genes between groups SBM and SBM supplemented with 63.6 g/kg MBM was in the inflammatory bowel disease (IBD) and JAK-STAT signaling pathway. To be specific, the expression of jak1, jak2b, stat1 and stat5a was significantly up-regulated when fish fed with SBM, suggested the activation of JAK-STAT signaling pathway, while the expression of these above genes was depressed by providing MBM to diet SBM, and the gene expression of toll-like receptors tlr2 and tlr5b showed a similar pattern. Moreover, intestinal flora analysis showed that community richness and abundance of beneficial bacteria (Cetobacterium and acillus_coagulans) were improved when fish fed with SBM supplemented with 63.6 g/kg MBM. Overall, methanotroph bacteria meal may alleviate SBMIE by regulating the expression of tight junction protein, toll-like receptors and JAK-STAT signaling pathway, as well as improving intestinal flora profile, which would be beneficial for enhancing the immune tolerance and utilization efficiency of turbot to dietary soybean meal.

Insights into the enhancement mechanism of immersion resistance of cooked noodles induced by wheat flour post-ripening: The view from protein cross-linking.

To overcome the problem that takeaway noodles possessed poor immersion resistance, in this study noodles were prepared from post-ripened wheat flour, and changes in textural properties, protein components, and water status of noodles were determined. The firmness and tensile distance of noodles were gradually increased by 7.40%-35.88% when wheat flour was post-ripened for 20-40 d. Afterwards, noodle textural qualities were slightly decreased. Compared with control groups, contents of glutenin macropolymer (GMP) and disulfide bonds were significantly (p<0.05) increased and protein network was also more compact, whereas the Glutenin/Gliadin ratio and free sulfhydryl groups content were significantly (p<0.05) reduced. Contents of sodium dodecyl sulfate extractable protein (SDSEP) were reduced by 3.22%-6.23%. Meanwhile, the decrease in A23 indicated that wheat flour post-ripening limited water-absorbing capacity of noodles during immersion. In conclusion, wheat flour post-ripening promoted the immersion resistance of noodles by inducing protein cross-linking, and the best post-ripening time was 20-40 d.